ME520-FU_DSR
The single channel measurement model ME520 provides very complete analog outputs for measurement, conditioning and conversion of signals such as strength, torque, pressure, displacement, acceleration sensors or strain gauges.
Three parameters can be adjusted with an easy procedure that allows output trimming depending on the sensor:
A wide range of options is available: isolated power supply and many other sensors adapted to ME520 or ME52C.
Availability date:
Quantity | Discount | You Save |
---|---|---|
4 | 17,00 € | Up to 68,00 € |
11 | 33,00 € | Up to 363,00 € |
26 | 50,00 € | Up to 1 300,00 € |
50 | 67,00 € | Up to 3 350,00 € |
100 | 83,00 € | Up to 8 300,00 € |
Isolated general supply | 24 VDC (+/-10%) |
Operating temperature range | -10 to +60°C |
Storage temperature range | -40 to +70°C |
Dimensions of rail DIN unit | H : 99 - L : 17,5 - P : 112 mm |
Connectors | 4x3 limits |
Approx. weight (without option) | About 110 grams |
Input | 1 sensor or 4x 350 ohm sensors set up in bridge, trimmed together an supplied with 5Vdc max |
Analog output | Jumper switch configuration: 0-10V ; ±10V, 0-20mA ; 4-20mA or ±20mA |
Precision | 0,01% |
Bandwidth | Jumper switch configuration: 2 KHz or 20 KHz at 3dB |
Calibration trim | 0,1 to 10mV/V |
Zero adjustment | Yes |
Gain adjustment | Yes |
Full bridge | 120 to 10K ohm |
Excitation bridge | 5 or 10 V |
Sensitivity | 0.1% |
Sensor excitation frequency | 5 VDC |
Resolution | ±0.3 mV |
Response time | 250 μs |
Conversion time | 1 signal period + 250μs 500μs |