Cart
0
Product
Products
(empty)
No products
To be determined
Shipping
0,00 €
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart.
There is 1 item in your cart.
Total products
Total shipping
To be determined
Total
View larger
Conditioner Rail Din ME520-CO
ME520-CO
The single channel measurement model ME520 provides very complete analog outputs for measurement, conditioning and conversion of signals such as strength, torque, pressure, displacement, acceleration sensors or strain gauges.
Three parameters can be adjusted with an easy procedure that allows output trimming depending on the sensor:
- A potentiometer to trim gain
- A potentiometer to trim zero
- A push button to trim calibration
A wide range of options is available: isolated power supply and many other sensors adapted to ME520 or ME52C.
Volume discounts
| Quantity | Discount | You Save |
|---|---|---|
| 4 | 17,00 € | Up to 68,00 € |
| 11 | 33,00 € | Up to 363,00 € |
| 26 | 50,00 € | Up to 1 300,00 € |
| 50 | 67,00 € | Up to 3 350,00 € |
| 100 | 83,00 € | Up to 8 300,00 € |
ME520-CO module
- XXXXXXXXX
Applications
- Conditioning of any kind of analog signal coming from a sensor to fit with data acquisition systems or Programmable Logic Controller (PLC)
- Electrical and physical measurement: strength, torque, pressure, displacement, acceleration, strain gauges..., on test bench or control of industrial process.
Options
- ME26-FLT Filtered output
- ME26ISO 3 channels galvanic isolation
- Butterworth 6th fixed order (BP on request)
- Input / output: 400 V - Input / power supply: 1000 V
| Isolated general supply | 24 VDC (+/-10%) |
| Operating temperature range | -10 to +60°C |
| Storage temperature range | -40 to +70°C |
| Dimensions of rail DIN unit | H : 99 - L : 17,5 - P : 112 mm |
| Connectors | 4x3 limits |
| Approx. weight (without option) | About 110 grams |
| Input | 1 sensor or 4x 350 ohm sensors set up in bridge, trimmed together an supplied with 5Vdc max |
| Analog output | Jumper switch configuration: 0-10V ; ±10V, 0-20mA ; 4-20mA or ±20mA |
| Precision | 0,1% |
| Bandwidth | Jumper switch configuration: 2 KHz or 20 KHz at 3dB |
| Calibration trim | 0,1 to 10mV/V |
| Zero adjustment | Yes |
| Gain adjustment | Yes |
| Full bridge | 120 to 10K ohm |
| Excitation bridge | 5 or 10 V |
| Sensitivity | 0,1 to 30mV/V |
| Resolution | ±0.3 mV |
| Response time | less than 300μs |